Recent content by hevnbnd

Which brasscraft is the best? The KT or G2?

I saw a display at my local plumbing supply for some vavle that pushed on the copper and made its connection. What brand is it? Any good?

How is the water piping inadequate? It now has 3/4" copper supply comming in and then 1/2 Ts off over to toilet. It also now has a 3" vent behind the toilet instead of a 2"

Any better now? Has 3" vent behind toilet now and 3/4" supply line. Anything else wrong. :confused: Also is it still considered a flat vent behind the toilet if it has 1/4" fall and a sweeping 90...

Anything wrong with the plumbing job in this picture? It is not entirely finished in this pic. The copper is all wrapped in a jacket now and the rocks are moved. It all has 1/4" fall per foot.

Thanks for all the great info.

Just curious how most measure fall. I know 1/4 per foot just not real sure an easy way to measure that. Thanks

I was thinking about a swanstone floor pan and then using backerboard and tiling up the wall and then a toilet facing it. However his would need 32" wide by about 6.7' long space for the toilet and shower. Is that the best utilization of space? Swanstone R-3232-010 VERITEK SINGLE THRESHOLD...

Thanks for your help. lol Not if you do your own work. There are NO INSPECTIONS!

Sorry should have been a little more specific. It is in the country so there is NO inspections.

I am building a shop and need just a toilet and shower in a bathroom. The sink is going to be outside the bathroom. What configuration would you go with to use the least square footage? Thanks and any drawings would be great.