Recent content by Gary3750

  1. G

    Air Injector Maintenance

    Yes I have a galvanized type tank with a submersible pump. Currently have the sniffer valve and bleeder valve. I have some sulfur gas and some iron. Things are OK in the winter, but during the summer, watering the small garden and a little yard watering seems to waterlog my 80 gallon tank. I...
  2. G

    Air Injector Maintenance

    Speedbump-Do you have a picture of this air pump system and will it work on a submersible pump? Can you explain a little more on how it works?
  3. G

    Thanks guys

    Since my post about pex lines running through the attic was eaten by the new server reset, I just wanted to thank the good folks that responded and relieved some of my concerns.
  4. G

    Gould or Grundfos?

    Thanks for the info.
  5. G

    Gould or Grundfos?

    I mainly would like to see their chart that shows the gpm from various depths and tank pressures like the other brands do. I would also like to know how many stages this pump has. Thank you
  6. G

    Gould or Grundfos?

    Thanks for the input. The two above pumps are about $530 plus $28 shipping from the on line auction site. Speedbump- The pump you suggested seems like a very good pump also. I could not find any of the specs on it though and would like to see that. Do you have a link to them?
  7. G

    Gould or Grundfos?

    Replacing my pump shortly and would appreciate your opinion on which pump you would recommend. Both are 10gpm, 3/4 hp, 2 wire. They will be installed in deep well at 150' with a static water level of 90'. Tank is set to 60/40. Both are priced about the same. Goulds 10LS07422 or Grundfos...
  8. G

    Do I need air my water?

    Thanks-I'll give it a try
  9. G

    Do I need air my water?

    When I pull the pump line up to clean the weep holes out, will the odor from the well itself be a good indicator? What about smelling the water that comes out of the pipe itself?
  10. G

    Do I need air my water?

    I have a 700' well with a 1hp pump at 150' and an Amtrol ERT80 tank. Refresh rate of 46 gpm. My weep holes in the downpipe are clogged and I will pull and clean them for now. After reading this forum I realize that my Myers Rustler pump probably won't last too much longer as it is 6 1/2 years...
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks