Recent content by creations15

  1. creations15

    GE Smartwater GXSF23Z01 wiring diagram

    Can't thank you enough. The white wire was plugged into the other side according to past posts. Works perfectly. THanks!
  2. creations15

    GE Smartwater GXSF23Z01 wiring diagram

    I appreciate it. Still getting ERR01. Is there a way to test the wire connection for a completion on the circuit? I spent quite a bit of time putting the wire into the connector so feel that it's connected. Just making sure it's in the right spot and all.
  3. creations15

    GE Smartwater GXSF23Z01 wiring diagram

    So I plugged it to the left of the green wire and the unit will not stop draining water now for some reason. I have to manually bypass it as unplugging it doesnt stop the draining. Any ideas?
  4. creations15

    GE Smartwater GXSF23Z01 wiring diagram

    Her Yep That was it. I really appreciate it.
  5. creations15

    GE Smartwater GXSF23Z01 wiring diagram

    This is a picture of the white wire I'm talking about. It goes in the connector with the green wire.
  6. creations15

    GE Smartwater GXSF23Z01 wiring diagram

    Good evening. Had the white wire unplug from the cover plate when cleaning the venturi which killed power to the unit Any ideas as to where it plugs into the board? Thanks Keith
  7. creations15

    GE Smartsoft model gxsf23z01 issues

    Thanks All for helping me with this. my hair is all fluffy again!! wife is super happy. I appreciate it. Next question. Friend of mine has same water softener seems not to be working. Took off cover and it is cycling through and water seems to be draining down to normal level. Cleaned...
  8. creations15

    GE Smartsoft model gxsf23z01 issues

    So I replaced the gasket kit and added more salt, then filled up my bathtub twice to drain hot water tank and regenerated twice. The water looks to be filling correctly now and brining correctly now. I will report my happy wife not having flat hair in a few days:)
  9. creations15

    GE Smartsoft model gxsf23z01 issues

    So just to confirm before I order this set of parts, I ran the entire cycle without stopping and advancing it and prior to drained water down to top of salt, which is maybe filled up in the bottom of the brine tank a foot at most, and just checked the water level after complete cycle and the...
  10. creations15

    GE Smartsoft model gxsf23z01 issues

    I really appreciate the help. I will check back in when completed.
  11. creations15

    GE Smartsoft model gxsf23z01 issues

    so are you my guidance counselor? which parts are we talking about here? http://www.partselect.com/ModelFrames.aspx?ModelID=490084&ModelNum=gxsf23z01&mfgModelNum=&ManufactureID=2&Selected=00010668i02&Position=2&mfg=GE&Type=&Mark=2
  12. creations15

    GE Smartsoft model gxsf23z01 issues

    I think I've taken the valve apart in the past. Can't remember. I haven't taken anything apart this go around. Just spoke to a tech. Told me to go buy a new one as GE doesn't make the parts anymore and he'd charge me $125 to come out and tell me that. Thought that was interesting. As I've...
  13. creations15

    GE Smartsoft model gxsf23z01 issues

    Is this something that a service technician will have to do or is it something mr. avg joe(me) can do?
  14. creations15

    GE Smartsoft model gxsf23z01 issues

    So I figured out the #113 plug was upside down. Would this be the issue? I changed it around so we will see what occurs.
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks