Recent content by basementbathroom

will vent work properly what i want to do is go a foot to sixteen inches straight down from shower drain, hook on semi-circular curved part of trap, then travel straight up and connect to elbow outlet of trap at a height that would allow me to connect the vent so it will be under the floor at a...

shower is 2" drain and i want to vent with 2" as well, the sewer line is 11" deep in the cement floor, can i lower my trap below the sewer line then come up to the vent and slope down to the sewer from there, this is so i can fit everything under the new floor thanks for your help

cutter hey pal I said I was trying this out for the first time, I did it wrong and u don't have to get pissy about it, the rat man provided competent instructions on how to use the cutter, which is what I was looking for and what did u provide.

chain cutter all i can rent here is a ratcheting chain cutter, i read on another site to spray the cut line with wd-40, will that help at all, the pipe is a pipe within a pipe, the outside was covered in rust tumours, i cleaned it off and the actual sewer pipe looks to be in better condition...

I have to cut approx 6' of 80 yr old 4" underground CI pipe out, should i do this in 1 piece or sections, also I have been looking around and people are calling chain/snap cutters the same thing or 2 different beasts, what's the difference or is there any, how to use the cutter is also confusing...

building bsmt bath, shower toilet vanity, house built 1925, sewer pipe was easy to get to but about 3' closer to toilet than i anticipated, small house cannot move anything around unfortunately, toilet has a 3" hole and is 12" out from the wall, 4" CI sewer pipe is approx 48" to the left of the...