jmandawg
New Member
- Messages
- 8
- Reaction score
- 0
- Points
- 1
Hi,
My toilet won't flush, i've already pulled it 3 times today and wasted 2 wax seals. I've snaked the toilet and i pull the toilet and snaked the sewer line up to around 50 feet. When i put the toilet back on, the first flush seems fine, then lots of bubbles come up and it won't flush successfully after that.
I've tried dumping 1.5 gallons into it from a buck and still no luck. Any ideas?
It is a gerber 1.6LPF. I've only been here a few months so don't know how old it is.
Thanks
J
My toilet won't flush, i've already pulled it 3 times today and wasted 2 wax seals. I've snaked the toilet and i pull the toilet and snaked the sewer line up to around 50 feet. When i put the toilet back on, the first flush seems fine, then lots of bubbles come up and it won't flush successfully after that.
I've tried dumping 1.5 gallons into it from a buck and still no luck. Any ideas?
It is a gerber 1.6LPF. I've only been here a few months so don't know how old it is.
Thanks
J