I did some searching, but couldn't come up with anything tangible. I am in the researching/planning/dreaming stages of putting in a half bath in my basement. The area where the bathroom would go is un-finished, but not roughed in at all. I have a septic line that is about 5-6ft off the ground that I would need to tap into. Is there anything I should be reading up on to watch the gotchyas and to make planning more realistic? I am thinking that I need to watch for venting, a grinder to pump teh waste up, a rear-ejector vs standard, breaking up the cement or not. Seems like a lot of potential issues, but I would imagine it isn't super uncommon. Any words or links of wisdom?