mtswash
New Member
Hello,
I have a 2 tank system both with the 7000sxt valves, there has been some confusion as to if they can be programmed so when one is in regeneration it won't pass raw water through, can this be accomplished through the programming? I can't seem to figure out, I've been told that they shouldn't bypass during regen, and I've been told that yes they will and the only way to not allow raw water to pass through is to install a solenoid hooked to the aux power on the outflow side. Obviously the goal with two tanks would be not to have any hard water pass through, so I'm hoping there is a way in the programming to accomplish this, so far I can't seem to find??? Thanks for any help on this.
I have a 2 tank system both with the 7000sxt valves, there has been some confusion as to if they can be programmed so when one is in regeneration it won't pass raw water through, can this be accomplished through the programming? I can't seem to figure out, I've been told that they shouldn't bypass during regen, and I've been told that yes they will and the only way to not allow raw water to pass through is to install a solenoid hooked to the aux power on the outflow side. Obviously the goal with two tanks would be not to have any hard water pass through, so I'm hoping there is a way in the programming to accomplish this, so far I can't seem to find??? Thanks for any help on this.