Hello all of you plumbing pros. This site has helped me many times in the past, but now I have a unique situation I have to post about.
I am remodeling my kitchen and moving the sink to an exterior wall, centering it under a 78" wide window. (The 78" is from the outside of the studs on either side of the window)
My problem is that I am having trouble figuring out the best way to vent the sink. I plan to use 2" drain line so if I am looking at code correctly my vent can be up to 4ft away (correct?)
However, the main vent for the house is about 10ft away (where the sink used to be) and on an adjacent wall.
My initial plan was to run a vent next to the window down through the floor where it can meet up with the drain from the sink.
I will be within my 4ft, but it will be towards the edge of it. Is there a better way to do this that I am not thinking of?
I have looked into AAV's, but there seems to be mixed feelings on this. Even when it comes to code, so it makes me wonder if this would be the best way.
Your thoughts....
Thanks in advance for any help!
I am remodeling my kitchen and moving the sink to an exterior wall, centering it under a 78" wide window. (The 78" is from the outside of the studs on either side of the window)
My problem is that I am having trouble figuring out the best way to vent the sink. I plan to use 2" drain line so if I am looking at code correctly my vent can be up to 4ft away (correct?)
However, the main vent for the house is about 10ft away (where the sink used to be) and on an adjacent wall.
My initial plan was to run a vent next to the window down through the floor where it can meet up with the drain from the sink.
I will be within my 4ft, but it will be towards the edge of it. Is there a better way to do this that I am not thinking of?
I have looked into AAV's, but there seems to be mixed feelings on this. Even when it comes to code, so it makes me wonder if this would be the best way.
Your thoughts....
Thanks in advance for any help!