Carsonic
New Member
I am adding a lav sink about 4 feet to the right of the existing one. I've built a little half wall to run the plumbing through so it goes behind my new cabinets. I need to know if I should put the tee in the vertical tailpipe section of the existing sink so I can plumb it similar to my 2 kitchen sinks only with a farther distance (my research so far indicates "probably not" ) or if I should put it in the main.
All I have seen are diagrams of drains halfway between the 2 sinks, so I'm concerned that there are issues with my asymmetrical setup that will cause me trouble. I am going from standard sinks to vessel sinks and raising the level of the countertop, if that makes a difference.
Thanks for the help!
(I live in GA, btw.)
All I have seen are diagrams of drains halfway between the 2 sinks, so I'm concerned that there are issues with my asymmetrical setup that will cause me trouble. I am going from standard sinks to vessel sinks and raising the level of the countertop, if that makes a difference.
Thanks for the help!
(I live in GA, btw.)
Last edited: