Betta Flo and 1 1/4" poly???

Users who are viewing this thread

MATTHEW1

New Member
Messages
7
Reaction score
0
Points
0
Location
Oregon
Hi my name is Matthew...I'm installing a new 1.5 H. 15gpm at 110' and was going to use 1 1/4" poly to keep pressure loss down. Does this cause any problems besides the extra cost? My well is also sleeved with 4 " pvc pipe and do I do anything different to install?

I"m very excited to install a CSV1Z and smaller pressure tank. What size would you folks think would be a minimum size?
Thank you for your help...Matthew
 

Valveman

Cary Austin
Staff member
Messages
14,599
Reaction score
1,296
Points
113
Location
Lubbock, Texas
Website
cyclestopvalves.com
The 1Z will fill the tank at 1 GPM. With a larger tank you would just set the valve at 58 PSI with a 40/60 pressure switch, so it doesn't take to long to fill the tank.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks