i have an old 2" gal nipple that used to go to a 2 in trap under the sink.
should i use a no hub with sleeve to transfer to PVC then do all new trap etc in PVC
or use 2" inch to 1 1/2 reducer then use all 1 1/2 brass traps etc
which is most pro job? thanx
should i use a no hub with sleeve to transfer to PVC then do all new trap etc in PVC
or use 2" inch to 1 1/2 reducer then use all 1 1/2 brass traps etc
which is most pro job? thanx